Bitstorm's BAD BOY Express is ideally suited for applications that require a greater degree of portability and flexability. For example, you can take it with you when you travel. Or quickly and easily take it down and lock it away.
Pulls in and locks onto the weakest signals. How do we do this? By putting the highest power Wi-Fi device available right at and connected directly to the antenna, the antenna cable is eliminated. What this means is that all of the available power (36dBm or 4W EIRP) goes out the antenna for maximum range and reception. And the data goes to your computer via a digital (not analog) computer grade cable. And since it's digital, you can locate your Wi-Fi device in the best location up to 300 feet (90 meters) away. No more compromises.
The biggest problem is often the line of sight that's needed for Wi-Fi. Surroundings that have water, wood and metal all contribute to reduced range. Then there's the miniscule 35-50mW that laptops put out - you can see the hotspot access point but it can't hear you. Unlike laptops and other mobile devices which put out only 35-50mW, this Bad Boy puts out up to 36dBm (4W EIRP) of power.
Compatible with Windows, Mac, Linux, whatever. Rugged, completely weatherproof and continues operating in extreme temperatures. Select Wi-Fi Access Points through your browser so there's no software to install. Easy rail or flat surface mounting.
The Express kit is intended for AC 100-250V, 50/60Hz operation. To operate directly from 12-20Vdc requires a special cable as used with our Xtreme product.
Features:
Any operating system: Windows, Mac, Linux, etc.
No software to install
Built in router allowing multiple connections to computer, IP cameras, etc.
Rugged, outdoor, weatherproof, extended temperature range
Extended warranty coverage available for up to 3 years
Connection Diagram:
Warranty Information
1. All Bitstorm products are warranted against defects in material and workmanship for a period of one year from date of purchase under normal use. Warranty does not cover damage caused as a result of improper installation.
2. The customer is responsible for delivering the defective product to the designated RMA address for repair or replacement.
3. At its discretion, Bitstorm will repair or replace a product that was found to be defective by Bitstorm during the warranty period.
4. This warranty does not cover labor cost for removing and reinstalling the device for repair nor for any expendable parts that are readily replaced in normal use.
5. The sole responsibility of Bitstorm under this warranty shall be limited to repair of this product, or replacement thereof, at the sole discretion of Bitstorm.
6. All RMA items shipped to Bitstorm must be freight prepaid. Bitstorm will pay the return freight via a service of Bitstorm's choice. Customer is responsible for payment of any shipping upgrades.
Limitation of Warranty
This warranty does not apply if product:
a. has been opened and/or altered, except by Bitstorm technical personnel,
b. has been painted in way shape or form,
c. has been damaged due to errors or defects in customer provided cabling,
d. has been subjected to abnormal physical or electrical stress, including lightening strike, misuse, negligence or accident,
e. has been improperly installed, including wiring errors or damage done to cable during installation,
f. failure to apply supplied dielectric grease to device connector,
g. has had removal of MAC address label (if one was affixed), or
h. has been loaded with incorrect firmware or attempted to have incorrect firmware loaded.
What information will be required?
1. Customer name, contact information, and shipping information.
2. Date and location of purchase (we may request a copy of the invoice as proof of purchase in certain, limited circumstance).
3. Problem description.
4. MAC address of each unit (if available).
5. Troubleshooting actions taken so far.
*** International Customers ***
1. Customer to use their own shipping account when sending products back to Bitstorm.
2. When sending back RMA, the commercial invoice must declare “Return For Repair” and “NO Commercial Value”. The total value of the commercial invoice cannot exceed $10.00USD. If these steps are not followed, the RMA will not be accepted or fulfilled.